For Poco M3 users, the EDL point is a feature that can be used for software upgrades, bootloading issues, phone unlocking, and other purposes. If you want to learn about Poco M3 EDL point and how to access it in your Poco M3, keep reading this article.
What are EDL Point and EDL Mode?
EDL, Emergency Download Mode, is a diagnostic mode unique to Qualcomm Snapdragon-based Android devices. Its primary purpose is to help unbrick or recover a device that cannot be booted normally. Through the EDL mode, the device can communicate with a computer through a specialized USB cable or a flashing tool that is compatible with the device. To access the EDL mode, users have to make use of what is called an EDL point or test point.
How does EDL Point work?
EDL point is only available in devices with Qualcomm processors. The whole process of entering EDL mode and utilizing it is complex. Here’s a surface-level breakdown of it in simple terms:
Accessing EDL mode
EDL mode is entered by utilizing hardware key combinations or using specific test points on the device’s circuit board. Some devices have a dedicated EDL button that, when pressed while connecting the device to a computer, triggers it to enter the mode. For devices without one, specific test points on the circuit board must be used to force it into EDL mode.
Special USB cable connection
A special USB cable is required to connect the device to a computer in EDL mode. The cable must come with the correct pin connections and usually has specific resistors or other components to enable communication with the device in EDL mode.
Flashing tool activation
Once in EDL mode, a compatible flashing tool will be needed to communicate with the device and perform various operations. You can flash firmware, unlock the bootloader, or recover your Poco M3 in this mode. The most common flashing tools are Qualcomm Product Support Tool (QPST) or Qualcomm Flash Image Loader (QFIL).
Unbricking and firmware flashing
EDL mode is mainly used for unbricking devices that cannot boot into the regular operating system. It can be either due to software issues or failed firmware updates. So you can flash your Poco M3 with a fresh copy of the firmware and restore it to a functional state.
Can Poco M3 be connected to EDL mode?
Yes, Poco M3 can be connected to EDL mode, thanks to the fact that it comes with a Qualcomm processor. So if you want to install the default ROM on your phone, update or install it, resolve a problem with FRP, link the phone to your PC, or do anything else for any other purpose, EDL mode can be used.
However, it’s important to note that accessing EDL mode and using flashing tools are risky procedures that should be performed carefully. In some cases, entering EDL mode the wrong way and flashing firmware may void warranties or violate your device’s terms of service. Moreover, using unofficial tools or firmware files can lead to various issues. So, it’s important to follow reliable guides and use tools provided by reputable sources when you’re working with EDL mode.
How to connect Poco M3 to EDL mode
Entering EDL mode is not too much of a complex procedure; you just have to do it carefully. Follow the steps below:
- Step-1: Open the back cover of your phone carefully and remove the battery to reveal the circuit board underneath.
- Step-3: After removing it, you will see a part on the corner where there are two circular dots placed at an angle. These two points are called Dot Points or EDL points. Using tweezers, carefully cut off the points.
- Step-4: Connect the USB cable to your phone and to the computer. But first, install the Qualcomm USB driver in your computer.
- Step 5: Your Poco M3 has now entered the EDL mode. Your computer will detect the Qualcomm USB QDLoader 9008 port via the USB cable.
Now that your phone is in EDL mode, you can do different things, like upgrading your software or flashing firmware. But keep in mind that there are risks in the process if you do it yourself for the first time. So, even if this procedure is tested, there is a risk of damaging your phone’s processor if you make mistakes. Either let a professional handle it or watch a tutorial.
