Oppo A3s LCD Display in BD: The Oppo A3s is a budget-friendly smartphone that was launched in 2018. It features a 6.2-inch IPS LCD display with a resolution of 720 x 1520 pixels and an aspect ratio of 19:9. The screen is protected by Corning Gorilla Glass 3, which provides protection against scratches and minor drops.
In terms of display settings, the Oppo A3s allows users to adjust the color temperature, contrast, and saturation to their preference. There is also a feature called Eye Protection, which reduces the amount of blue light emitted by the screen to reduce eye strain.
Also Check: Xiaomi Redmi Note 4 Battery Replacement
Oppo A3s LCD Display Best Features
It has a screen-to-body ratio of 81.2% and a pixel density of approximately 271 pixels per inch (PPI). The display also supports multi-touch and has a capacitive touchscreen.
The Oppo A3s LCD display features a notch at the top of the screen, which houses the front-facing camera and earpiece. The notch allows for a larger display area without increasing the size of the phone.
The display of the Oppo A3s also supports color temperature adjustment, which allows users to adjust the color temperature of the display according to their preference. It has a standard 60Hz refresh rate, which means it can display up to 60 frames per second.
Overall, the Oppo A3s LCD display is a decent mid-range display with good viewing angles, vibrant colors, and decent sharpness. It is suitable for everyday use, including browsing the web, watching videos, and playing games.
Oppo A3s LCD Display Repair
- Purchase a new LCD display: You can buy a new LCD display for your Oppo A3s from a reliable supplier or an Oppo service center. Make sure the display is compatible with your phone model.
- Power off the phone: Turn off your Oppo A3s and remove the SIM card and SD card (if present).
- Remove the back cover: Use a plastic opening tool or a guitar pick to gently pry open the back cover of the phone.
- Remove the battery: Unscrew the battery connector and use a spudger tool or a plastic opening tool to remove the battery.
- Disconnect the display connector: Unscrew the display connector and disconnect it from the motherboard using a spudger tool or a plastic opening tool.
- Remove the broken LCD display: Use a heat gun or a hairdryer to soften the adhesive around the edges of the LCD display. Gently lift the display using a suction cup and a plastic opening tool.
- Install the new LCD display: Carefully place the new LCD display in the phone and connect the display connector to the motherboard. Screw in the connector and test the display.
- Reassemble the phone: Reinstall the battery, screw in the connector, and reattach the back cover of the phone.
- Power on the phone: Turn on your Oppo A3s and test the new display to ensure it’s working properly.
Oppo A3s LCD Display Downsides
The Oppo A3s LCD display has some downsides that you should be aware of:
- Low resolution: The Oppo A3s LCD display has a resolution of 720 x 1520 pixels, which is relatively low compared to other smartphones in the same price range. As a result, the screen may not be as sharp or detailed as you’d like.
- Limited viewing angles: The viewing angles of the Oppo A3s LCD display are not as wide as some other displays. This means that the colors and brightness of the screen may appear distorted when viewed from certain angles.
- Average brightness: The Oppo A3s LCD display has a maximum brightness level of 450 nits, which is decent but not exceptional. This means that the screen may be difficult to read under bright sunlight or in outdoor environments.
- No protection: The Oppo A3s LCD display does not have any protective features like Corning Gorilla Glass or a scratch-resistant coating. This makes the screen more vulnerable to scratches and damage from accidental drops.
About Author
